In the process of using greenhouses to grow vegetables, there are many things that need to be paid attention to. If the materials used are not maintained well, it is a waste of cost. Qingzhou Luhong Plastic Co., Ltd. will tell you about In the process of using the greenhouse to grow in order to avoidVegetable greenhouse filmWhat are the methods of damage?

1. The laminating rope should not be tied too tightly or too loosely to avoid friction between the three. After pulling the film rope, a soft cloth strip can be wound on the steel wire under the film rope to slow down the wear speed. In the process of using, clean the film, find the easily damaged places in advance, and take measures in advance to provide a good growth environment for plant growth.

2. At the support frame on the front of the greenhouse, add a layer of old film on the film, or set up a non-woven fabric on the front of the shed, which can reduce the damage of the grass curtain to the place. The old film is about 30cm wide, with the folded corner as the middle, 15cm on top and bottom. The non-woven bra is 15 cm above the front fold corner.

3. For the damaged vegetable greenhouse film, a wide tape can be used to paste a hole, and the film must be wiped clean before pasting. For larger damaged areas, rubber repair can be used. Clean the area around the hole and apply glue with a brush. After 3-5 minutes, stick a film of the same texture for the construction of vegetable greenhouses. After the glue dries, you can stick it firmly.

The above information is the method introduced by Qingzhou Luhong Plastic Co., Ltd. to avoid damage to the vegetable greenhouse film, or how to repair it if it is damaged. Hope that we can help you through our sharing. If you need this product, you can order this product. , If you want to know the information of other products, you can call our company or follow the company's dynamics to leave a message, and we have relevant staff to answer you.